Parametric Outdoor Project Box

prusaprinters

<p>This project box is customizable using OpenSCAD, just open the .scad file and on the right hand side you can adjust the parameters.</p><p>The top holes default to a radius of 3.5mm which is the size of an SMA antenna connector. (7mm Dia). I also add a small square indent on the top holes to help orient most SMA connectors. ( I plan on adding hexagonal indents in the future).</p><p>This box has an IP rating of ..... just kidding :) but I have tested a box for the last 2 years outdoors using it as a solar powered weather station and every time i've opened it there has been no signs of water intrusion. Its been through heavy rains, strong winds and heavy ice/snow storms.</p><p>I print mine with PETG and have had good luck with longevity outdoors. Of course I make no guarantees that you'll have the same results, but with a few test prints to dial in the tolerance of the lid, you to can have similar results.</p><h3>Print Settings</h3><p><strong>Printer Brand:</strong></p><p>Creality</p><p><strong>Printer:&nbsp;</strong></p><p>Ender 3</p><p><strong>Rafts:</strong></p><p>No</p><p><strong>Supports:&nbsp;</strong></p><p>No</p><p><strong>Resolution:</strong></p><p>200</p><p><strong>Infill:&nbsp;</strong></p><p>38</p><p><strong>Filament:</strong> PolyMaker PETG</p><p>&nbsp;</p><p>&nbsp;</p><p>&nbsp;</p><p>Category: 3D Printing</p>