Parametric tripod iPad / tablet stand

thingiverse

### A tablet holder designed to be mounted atop a tripod. The model is designed for the iPad (5th gen), but any tablet can be used. The provided arms allow tablets with a width range going from 231 to 258 mm. An OpenSCAD file is also provided to easily generate longer or shorter arms for another width of tablet. The minimum tablet width is 165 mm. A QS-29 tripod mount quick release adapter is provided with the model. This adapter screws onto the body of the model. It is, however, easily adaptable to non QS-29 systems. The body of the model has 3 M5 holes for mounting. They are positioned at the vertices of a triangle with a side length of 17 mm. The body can be mounted to any flat surface with correctly positioned M5 holes. ____ Requirements: * 1 x Body (print) * 1 x FrontPlate (print) * 1 x ArmLeft (print) * 1 x ArmRight (print) * 2 x armHoldingPlate (print) * (1 x QS29adapter (print)) * 10 x M5 washer * 4 x bolt M5x20 * 1 x bolt M5x16 * 6 x bolt M5x16 or longer * 11 x M5 nut (max 5mm thick) ____ Ideal print settings: * Layer height: 0.2 mm or lower * No supports, except for the arms * 15 % infill * 3 walls Two versions of the body are provided: the original design and a slightly modified version, being 'body_bridged'. The latter contains a few [sacrificial bridges](https://bit.ly/3lA7Dho), allowing printing of the body without support.