Parametric Vise Soft Jaws

thingiverse

This is a set of parametric vise soft jaws. This model is base on my previous Vise Soft Jaw Design (http://www.thingiverse.com/thing:1376177). The length and width of the soft jaws can be altered to accommodate any vise. As well the knurling pattern on the front jaws face can also be altered. A V-groove has also been included for holding round materials. Below are all the dimensions that can be adjusted. //vise dimensions viseLength = 100; jawWidth = 12.7; thickness = 6.35; //knurl pattern settings knurlAngle = 45; knurlWidth = 0.5; knurlDepth = 2; knurlSpacing = 7; //v groove size vGrooveSize = 10; //Dimensions of magnets magnetSize = 5.1; //oversize magnet hole slightly to ensure close fit magnetSpacing = 25; Edit: The V-groove position can now be adjusted. As well there is an option to choose either circular or cubic magnets. Print Settings Printer Brand: RepRap Printer: MakerFarm i3V 10 Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0.25mm or less Infill: 20-25% Notes: Use cyanoacrylate glue to bond the magnets to the soft jaws. Make sure to slightly oversize the magnet holes so that they have be easily inserted into your printed parts.