Patio Shade - Replacement Hardware

prusaprinters

<p>This is a replacement end for a patio shade. Dimensions are the same as the original. My plastic ends broke off so I designed these ends.&nbsp;</p><p>The bungee ball bracket is here: https://www.printables.com/model/229157-patio-shade-bungee-ball-bracket-extra-or-replaceme</p><p>For strength and a clean print, this is printed as two pieces and you press them together with a hammer/screw driver. I put the screw driver through and then hammered the screw driver on one side to seat the two pieces together.<br><br>Print with PETG at the high end of the temp range 250C.</p><p>Print the hook on it's side with supports to support the gap.<br><br>5 perimeters.</p><p>Once assembled, this is hammered into place. There are partially sacrificial friction ribs that will shave a little when installing but will be tight in place.</p><p>I got 4mm bungee cord to replace the cord that broke. This whole setup is more durable than the original IMO.</p>