Pebble Watch Stand (Including Bunk Bed Version)

thingiverse

It's a pretty straightforward design. I made the bunk bed version first since I wanted a place to put my Pebble smart watch at night without having to get off from my bunk bed. The bed version is designed for beds with holes on the corners to support the rod for a bunk bed. I then figured I might as well just take the same fit and use it to make a version that can just stand on its own. It's designed for the original pebble. I have no idea if it will work with a pebble steel or pebble time, but anyone is obviously welcome to try either of those watches. I also uploaded the STEP files, so feel free to make any improvements. Instructions I used PLA with .2 resolution and 12% infill. I'm sure you could get away with less though. I didn't need or use supports on either of them, although you might need some on the cylinder peg on the bed version depending on how well your printer can handle that. Both took about an hour on my Makergear M2. The charger for the watch fits into the hole, and that magnet is what holds up the watch. The charger mount on the ones I printed was tight enough to hold it easily, so it shouldn't be a problem. The platform the watch rests on has to be offset from the bottom of the charger a little bit because of the shape of the watch, and I'm pretty sure I've found the right distance to offset it, but you might have to play with it a little. I haven't really had any trouble getting the watch to stay on though. One other thing to note, I have two chargers. The magnets in one of them aren't strong enough to hold the watch up. So if the watch doesn't stay on, it might also just be the charger.