Peg Board Wall Protector
prusaprinters
<p>I got a steel beg board to hand some tools in my room and noticed that the metal could damage the paint behind the board so I made this to separate the board from the wall just a couple of millimeters. This item is meant to go over the corners of the peg board. <a href="https://www.lowes.com/pd/Knape-Vogt-Knape-and-Vogt-32-in-W-x-16-in-H-Steel-Steel-Garage-Storage-System/1002630220">This </a>is the peg board that I got (not an affiliate link). </p><p>The gap for the board to slide into is 2mm wide. So this leaves a little bit of play between the item and the peg board. When you fasten the peg board down they should no longer move.</p><p> </p><p>Print instructions: </p><p>Copy and past the item for as many as you need.</p><p>infill 15%.</p><p>No supports needed.</p><p>Print Settings: 0.20mm Quality.</p>
With this file you will be able to print Peg Board Wall Protector with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Peg Board Wall Protector.