Pegboard Holder for Hex Drivers

prusaprinters

<p>Remix of <a href="https://www.prusaprinters.org/prints/5073">Billiam's model</a>. As he hinted at, his model may not work with thicker pegboards, and that was indeed the case for the pegboards on my Seville Classics workbenches because the pegs didn't fit. I also found the holes for the drivers to be a tad too large. So I replaced the pegs with ones I use in my own models of pegboard components and made the holes smaller. I also made the lettering a bit deeper to make it more readable.</p><p>This should fit any standard 1'' inch pegboard but then again, thickness and hole size can vary quite a bit between brands.</p><p>Technically I guess this model is not a remix but a re-implementation as I started from scratch in Fusion 360. But credit where credit is due, as of course the inspiration for it came from Billiam's model.</p><p>UPDATE 10/21/2020: Added a new version that uses embossed numbers instead of debossed numbers. This way it can be printed in two colors, to make the numbers more readable from a distance. The price is, it's better to print with the pegboard pegs facing the print bed and using supports. It will be an ugly backside but then again, it's against the pegboard so who cares.</p><p><strong>If you like what I'm doing…</strong><br><strong>&nbsp;</strong><br>…consider&nbsp;<a href="https://www.buymeacoffee.com/mix579">buying me a coffee</a>.<br><br><img src="https://media.prusaprinters.org/media/prints/69467/rich_content/51be8e2b-e636-4591-a248-63a50ce552e9/image.png#%7B%22uuid%22%3A%22eb691bae-eb13-49b7-b2f0-e249fd91e239%22%2C%22w%22%3A170%2C%22h%22%3A37%7D" alt="orange_img.webp"><br>&nbsp;</p><h3>Print instructions</h3><p><strong>Slicer:</strong> PrusaSlicer<br><strong>Resolution:</strong> 0.2mm<br><strong>Infill:</strong> 10%, 40% for the pegs<br><strong>Support:</strong> Yes. I use 0.25mm contact Z distance, 3 mm pattern spacing, 4 interface layers, and 75% xy separation.</p>