Philips Hue Remote Wall Plate

prusaprinters

<p>I was inspired by Jutrasb's printable plate (link below), but I needed one that was a little bigger since I didn't want to repaint the wall, and also I didn't want the screw holes showing.</p> <p>Since I've been learning Fusion 360, I decided to work on it there, and make some snaps to keep the lid on.</p> <p>It also uses the magnets that came with the original Phillips Hue remote plate, they were still tacky enough when I pried them off the old plate that they stuck to the new plate long enough for me to snap the cover on top which secures them.</p> <p>There are two versions of the face plate available, one with the switch accessible, and one without if like me you just want to leave it on/off all the time.</p> <p>Since I'm still new to Fusion 360, I can't promise that all the features are parametric, and will update properly, but I'm attaching the source if you want to resize it.</p> <p>Or you can check out Jutrasb's version here: <a href="https://www.prusaprinters.org/prints/31534-philips-hue-remote-wall-platecradle-with-original-/remixes">https://www.prusaprinters.org/prints/31534-philips-hue-remote-wall-platecradle-with-original-/remixes</a>.</p> <h3>Print instructions</h3><p>Since all printers are different, you may or may not need supports, I printed mine with detachable supports just to be on the safe side.</p>