Phone desk stand for iPhone 12/13

prusaprinters

<p>A basic stable phone stand designed to fit the iPhone 12 and 13 (not the Pro or Mini sizes). Similarly-sized phones may fit, but the layout was designed to closely fit the iPhone 12.</p><p>The stand is intentionally designed to be more bulky than other phone stands because I prefer greater stability and lack of risk of knocking the phone over. The fit of the fittings can be hit or miss based on material; for my printer using PLA, the fittings are secure but not tight.</p><p>Print with no supports on 15–20% infill.</p><p>The model is split into parts:</p><ol><li>Frame: The border surrounding the phone. I recommend printing on a textured steel sheet for a nicer finish.</li><li>Core: The base of the stand on which the phone sits. All PLA is fine, but you can also print the top few layers in TPU for a softer finish.</li><li>Front leg: Angles the core and the phone to a set angle. 10, 20, and 30 degree variations are provided.</li><li>Back leg: Print the same angle variation as the front leg.</li><li>Foot pads: <i>Optional</i>, but can be printed in TPU or cut from rubber or foam. These are inserted into matching slots in the bottom of the legs to reduce the slipperiness of the stand.</li></ol>