Phone holder for Bike (interchangable mounting)

prusaprinters

<p>I desigend this print to use it on my foldable bike when i am traveling, its great when you want to use Google Maps!</p><p><strong>Assembly instrucions:</strong></p><p>01. Put on the clamps on the screw, L and L are marked and belong together (one side is left, the other is right threaded)</p><p>02. Screw on the clamp just enough so you can put on the “Screw_Head” and put the other side the same distance from the middle (roughly 32mm)</p><p>03. Now you can turn the screw until the clamps are in place and connect the screwhead with a piece of filament</p><p>04. After that you need to insert the “Pins”, just use a hammer for that</p><p>05. Now you can put a adapter of maybe even you own design</p><p><strong>Notes:</strong></p><ul><li>If you use “Mount_1_Bike” you also need a M5 Nut and A M5x16mm bolt, to secure the the adapter to the basis i also used an M5x20mm screw.</li><li>I designed the phone holder so people would be able to remix different adaptors for different applications, the "Mount_Basis_For_Remixes" is in the files, a drawing of it is also at the end of the pictures.</li><li>“Screw_95p” is the scaled down version of the Screw for slightly looser tolerances, and has built in support. &nbsp;</li><li>Everything is printed in PETG, PLA should work too, but maybe would cause Problems with “Mount_1_Bike”</li><li>The diameter of the bicycle handle for “Mount_1_Bike” is around 22mm</li></ul><p>&nbsp;</p>