Phone holder Phone stand - print on side

thingiverse

A seamless phone tablet Laptop stand. It takes 1 h 40 min to print. No overhang, NO sharp edges, No support, YES YES YES. Inspired by https://www.thingiverse.com/thing:1464340 and redesign using Fusion 360. Thing 1464340 is definitely a beautiful piece. However, the curve near the bottom often comes not smooth, which is the driven force for the remix. Here, I round all the edges in the redesign that will be safe for my 2 years old son. Most importantly, I design it in a way that the holder can print on the side, so that there is no more overhang issue at all and the beautiful curvature in the design can be achieved nicely in the print. PhoneHolderV2_PrintableOntheside.stl Use this for printing and print as it is. PhoneHolderV2_forModification.stl This is for the purpose of modification. Just in case you want to add a logo on the back of the stand. The angle of two plates are 40° Gcode is often shared here. The part is located in the center, Prusament PLA, Prusa MK3, 20% infill, no rafts, no supports. Update 06/11/2019: Sorry that 3D view is showing. I change ASCII and Binary .stl back and forth. It is not working. Anyone can help? I designed in Fusion 360, then change orientation in Prusa slicer, export from slicer. I even try to TinkerCAD. No success. Update 06/11/2019: PhoneHolder Hearthstone.stl hearthstone logo on the back PhoneHolder Toronto Raptors NBA.stl Raptors logo on the back Logo from https://www.thingiverse.com/thing:3678833 Update 10/12/2019: You can buy the stand from my Etsy shop https://www.etsy.com/your/shops/Ph3DP/tools/listings/743984893 3D printed simple yet elegant phone stand holder