Photo or Video Turntable - Motorized - 608 Bearing

prusaprinters

<p>Turntable for taking photos or video. It's designed to be motorized and rests on 608 bearings! There's now working controller software in the github repository.</p> <p>This is a scratch rebuild for 608 bearings from the measurements of <a href="https://www.thingiverse.com/thing:1826589">https://www.thingiverse.com/thing:1826589</a> (where you can also find some driver software)</p> <p>Electronics and software now at: <a href="https://github.com/Inhibit/3D_Designs/tree/master/Motorized_Turntable">https://github.com/Inhibit/3D_Designs/tree/master/Motorized_Turntable</a></p> <p>Build Video now up on YouTube: <a href="https://www.youtube.com/watch?v=Fnc5LVbg8Z8">https://www.youtube.com/watch?v=Fnc5LVbg8Z8</a></p> <p>And a write-up on PCBurn: <a href="https://pcburn.com/motorized-turntable-for-video-photo-and-3d-scanning-diy/">https://pcburn.com/motorized-turntable-for-video-photo-and-3d-scanning-diy/</a></p> <p>12/15/19 Mk3 Update: Base structure is now rigid, a lip is added to the table to make better contact with the bearings.</p> <h3>Print instructions</h3><p>I printed this out of PETG with the default settings on the Prusa i3 Mk3. I believe it was at 20% infill with no support, layer height set to .20mm Quality. It shouldn't matter <em>too</em> much what you use as all the features except for the clip are large enough to not matter.</p>