Pi TFT plus Console Case

thingiverse

The AstroBox Touch has got me excited: [Kickstarter](https://www.kickstarter.com/projects/astroprint/astrobox-touch-a-powerful-touchscreen-for-your-3d "Kickstarter") or [AstroPrint](https://store.astroprint.com/collections/accesories/products/astrobox-touch-a-powerful-touchscreen-for-your-3d-printer-pre-orders "AstroPrint Preorder") So I made a case for a Raspberry Pi (3) and an Adafruit 3.5" TFT in a console style. The Console consists of 3 parts: The Base, The Body and the Top or screen bezel. I used embedded nuts to bolt the parts together and for mounting the Raspberry Pi. The voids for the nuts are in the STL files, simply pause at the layer height and place the nuts then resume printing. There are choices for the Base, some are enclosed and some an open frame. Both have options for a 40mm fan. The fan mounts below the Raspberry Pi, but there is an air duct that directs air flow over the top of the Pi as well. The Body and Top should be rotated 45º to sit flat on your print bed. The BaseFanFrame should also be rotated to sit flat on the print bed for best results on the fan mounting surface. After building your enclosure, follow this [tutorial](https://learn.adafruit.com/running-opengl-based-games-and-emulators-on-adafruit-pitft-displays/pitft-setup?view=all#pitft-setup "Adafruit Learn") at Adafruit Learn to get it up and running. When asked "Select project" choose option #2 and "Configure options manually". Enjoy ! <img src="http://www.trueyoucreativity.com/blog/wp-content/uploads/2017/02/new.gif" width="100" height="100" /> ***UPDATED*** ***10/18/2017*** Added: Revised PiBox, I made the wall with the power plug opening thinner to allow plug to seat better. Title: PiBoxTFTPiBoxPlugFriendly.stl Added: I converted my SolidEdge part source files for those who would like to modify the parts into STEP (.stp) files which can be opened in a variety of software packages including AutoDesk's ***FREE*** [Fusion 360](https://knowledge.autodesk.com/support/fusion-360/troubleshooting/caas/sfdcarticles/sfdcarticles/How-to-activate-start-up-or-educational-licensing-for-Fusion-360.html "Fusion360"). ***11/14/2017*** Added a Base for a [50mm blower fan](http://a.co/83bCpUB "Blower Fan") with 20x15mm outlet. ***MUCH*** better airflow.