Piggyback Fuse Cover for Triumph Bonneville T100

prusaprinters

<p><strong>Be Warned: I'm neither a motorcycle mechanic nor an electrician, so modify your bike's electronics at your own risk!</strong></p><p>This is an alternative to the stock fuse cover for the Triumph Bonneville provides the extra height and wire-out hole needed to add a piggyback fuse that can provide switched power to an accessory relay without the need to splice any wires.</p><p>The output wire hole is positioned for placing the piggyback fuse in the turn-signal slot (#7). &nbsp;The turn signals illuminate when the bike is on, and their blinking is switched at ground, so this fuse slot will be live when the bike is switched on. &nbsp;I chose this slot because because it ensures that the piggyback fuse fits entirely within the fuse box, and because turn signals are not essential to the bike's running if there's a failure (you can always fall-back on hand signals).</p><p>This print consists of two parts:</p><ol><li>a base riser which clips onto the existing fuse block and has a hole for the output wire, &amp;</li><li>a cover which clips onto the riser</li></ol><p>Assembly is pretty simple:</p><ol><li>clip the bottom riser onto the stock fuse cover</li><li>install your piggyback fuse in slot #7 ensuring that the piggyback wire exits through the hemicircle in the bottom riser</li><li>clip the top fuse cover to the riser ensuring that the wire passes through the corresponding hemicircle.</li></ol><p>I printed mine in black ABS, and have been riding with it it for a year or so with no issues.</p>