Piper 2v2 Belt Tension US version (Remix)

thingiverse

Remix of https://www.thingiverse.com/thing:3116408 . This is for the <250mm version using 6mm belts and idlers/pulleys Found that the current US version of the Piper 2v2 wouldn't work with the original by Zinoberrot. The belts are slightly closer together. Adjusted for that, and shortened the overall adjustment length to better work with my 2" long #6-32 screws. Print 1x Chassis, 1x Slide Nut, and 2x Clamps. These parts are NOT properly oriented for printing. Orient to your best judgment, or do as so The clamps can go ears down, arch up (that's the way we like to print) The Slide Nut should be with nut inserts facing upward The Chassis should be ears down and normal supports instead of tree supports will save time and filament. Required hardware: 4x #6-32 3/4" screws, nuts, and washers (1 washer for each screw) 2x #6-32 2" screws, nuts, and washers (1 washer for each screw) 1x M3x50mm screw and lock nut. 2 washers. 2x 3mm bore 20 tooth GT2 idlers for 6mm belt -- https://www.amazon.com/dp/B01H3DSGAC I'm printing in PETG with 4 walls and 40% infill