Pixel 2 Case

prusaprinters

<p>I modified my basic protective case for the Google Pixel 2 with a hexagon cutout pattern, inspired by Screwyluie's XL design.</p> <p>The case is designed for a secure snap fit around the corners, while still being relatively easy to remove. I've left wide cutouts around the power and volume buttons so they remain easily accessible, and a wider cutout around the USB C port to accommodate my USB C headphones' over-sized plug.</p> <p>The case shell is 1.2mm thick</p> <p>I've included STL, SLDPRT (SolidWorks) and STEP files of the design, at least one of which should be compatible with most CAD software for editing.</p> <h3>Print Settings</h3> <p><strong>Printer:</strong></p> <p>FolgerTech 2020 Prusia i3</p> <p class="detail-setting rafts"><strong>Rafts: </strong> <div><p>No</p></div> <p><strong>Supports:</strong></p> <p>No</p> <p class="detail-setting resolution"><strong>Resolution: </strong> <div><p>0.2mm</p></div> <p><strong>Infill:</strong></p> <p>100%</p> <p><br/> <p class="detail-setting notes"><strong>Notes: </strong></p> </p><div><p>I printed this in e-Sun PETg filament, 240C, bed with painter's tape at 60C. Printed at 100% scale, but shrinkage may vary from printer to printer and material to material, so please comment with any other settings that work.</p> This should be printed flat on its back for best results. <p>The case thickness is 1.2mm, so a .4mm nozzle works best.</p> <h3>How I Designed This</h3> <p>Measured my new Pixel 2 with digital calipers. It took several design iterations before the slots lined up exactly on the camera and fingerprint reader, and several more before the fit was just right.</p> </div></p></p> Category: Mobile Phone