Pixel 4 Cases - For both hard and flexible filaments

prusaprinters

<p>New phone, new case designs!</p> <p>I've included four designs: Two flexible designs, one solid and one with a hex pattern, and two rigid designs. The rigid versions are designed for a secure snap fit around the corners, while still being relatively easy to remove. The flexible designs holds all around the perimeter of the phone for a better grip.</p> <p>The case shell is 1.2mm thick.</p> <p>I've included STL, SLDPRT (SolidWorks) and STEP files of the design, at least one of which should be compatible with most CAD software for editing.</p> <h3>Print Settings</h3> <p><strong>Printer:</strong></p> <p>FolgerTech 2020 Prusia i3</p> <p class="detail-setting rafts"><strong>Rafts: </strong> <div><p>No</p></div> <p><strong>Supports:</strong></p> <p>No</p> <p class="detail-setting resolution"><strong>Resolution: </strong> <div><p>0.2mm</p></div> <p><strong>Infill:</strong></p> <p>100%</p> <p><br/> <p class="detail-setting notes"><strong>Notes: </strong></p> </p><div><p>I printed the flexible design in black Alchement TPU (flexible) filament at 220C, and the bed with painter's tape at 60C. Printed at 100% scale, but shrinkage may vary from printer to printer and material to material, so please comment with any other settings that work.</p> The rigid design I attempted in White [eSun](https://www.amazon.com/s?k=esun+filament&amp;linkCode=ll2&amp;tag=thingiverse09-20&amp;linkId=ee95e18399f58ca8cf2c8c2b4b912c0c&amp;language=en_US&amp;ref_=as_li_ss_tl) PETg at 230C with the same bed. Although it snapped onto the phone snugly, the low print temperature allowed for some undesirable warping. I'd recommend a better bed treatment and a higher print temperature to help counteract any warping. <p>This should be printed flat on its back for best results.</p> <p>The case thickness is 1.2mm, so a .4mm nozzle works best.</p> </div></p></p> Category: Mobile Phone