PixelWing Enclosure

thingiverse

An enclosure designed for the [PixelWing ESP32-S2 RGB Matrix](https://circuitpython.org/board/odt_pixelwing_esp32_s2/) by [Oak Development Technologies](https://www.tindie.com/products/oakdevtech/pixelwing-esp32-s2-rgb-matrix/). I created it for use with [TallyCircuitPi](https://github.com/deckerego/tally_circuitpy), a tally light platform used with OBS to indicate which cameras are live during a broadcast. The print comes in two parts: the front which is intended to be used as a diffuser for the super-bright LEDs, and a back part which snaps to the enclosure and includes a flash shoe mount to attach to a camera. Gaps are left for access to the reset button + LED, the USB-C port on the side, and the ESP32 antenna at the top. Printed on an M3D Micro+ at "high" detail and low infill. Even on that printer the standoffs for mounting and snap-together came out okay. If it can print on the Micro+, it should be able to print easily on most printers even at a low resolution.