PKD-2019 Blade Runner Blaster (working Hammer)

cults3d

This is my remix for some parts of AndersPF take on the 1982 Blade Runner Blaster. To complete the Blaster, you have to print all of AndersPF parts: https://www.thingiverse.com/thing:4260720 You will need to modify some of AndersPF original parts as well as some additional hardware to make this Hammer and Trigger assembly actually work. Steps needed: Print above listed files Drill Reciever for the mounting pin (d = 2mm) Drill inner Grip Frame in the middle crossbar section for the Springrod (d = 5mm) Extra parts needed: Spring (5mm inner Diameter; 50mm long) Pin (d = 2mm; l = 7mm) -> Nail recommended Pin (d = 2mm; l = 13mm) or Grub Screw as a Hammer rotational point Make sure to drill the Receiver as exact as possible, otherwise the functionality may be compromised. I used this picture as a reference. You can use it as an orientation for the Springrod hole in the Grip frame as well. http://pds.exblog.jp/pds/1/201005/19/42/a0077842_1018477.jpg It should measure 7mm up and in from the corner of the Receiver for the Hammer rotation point. Maybe print a receiver as a test first and fit my parts before you drill the real thing. Have fun making! Dobby