Plant support guide for shelves (e.g. Ikea Kallax)

prusaprinters

<p>This 2 gram print gently supports the branches of an ivy plant along a shelf edge, a vine along a fence, etc.</p><p>The STLs are optimized for Ikea Kallax shelves with a 16.5mm shelf edge. The two pieces clip together to allow 6 different orientations of the spiral, all while printing without supports.</p><p>The included 3MF has everything set up and correctly oriented to get printing right away. I've printed mine with Prusament PETG.<br>The .gcode prints 6 holders on a Mk3 MMU2S Single.</p><p>The included Fusion360 .f3d file is parametric to allow easy adaptations that fit other shelves or boards.</p><p>(Ikea also sells ivy plants: Hedera Helix).</p><h3>Print instructions</h3><p>No supports needed. Orient the pieces so that the <strong>hook</strong> is flat on the print bed, and so that the hexagon hole of the <strong>clamp</strong> is flat at the top for easy bridging.<br>Recommended layer height .25mm, recommended nozzle .4 to get optimal results with the hook.<br>If you'd like to use a different nozzle, you may want to edit the Fusion360 parameters "extrusion_width" and adjust the settings of CoilPrimitive1.</p>