Planter “Extra”

**A planter for your home or garden that elevates your favorite plant.**
It has holes for water drainage and keeps your plant saver then on the ground or serves as additional space in a larger pot.

**Versions included**
- V2_multi_details: three faces and fine details
- V2_multi_basic: three faces and smooth surfaces
- V2_single_basic: one face and smooth surfaces
- V1: The older version one

**Scaling / size**
- Upscaling (100% +): as big as you want
- Regular size (100%): 115 x 115 x 200 mm
- Downscaling (99% – 61%): works great
- Minimum size (60%): 69 x 69 x 120 mm
Everything smaller than that may cause issues

**Print settings**
Material usage (100% scale): 120g
Print time: (100% scale): 10h

Material usage (60% scale): 35g
Print time: (60% scale): 4,5h

Material: PLA
Print direction: stl is rotated correctly, check images
Support: none
Nozzle size: 0,4 mm
Line width: 0,4 mm
Layer height 0,2 mm
Outer walls: 3
Infill: 15%
Build plate adhesion type: A brim is recommended but not necessary

Watertight printing: If you have a well set up machine it comes automatically - Otherwise here are some tips: Increase your wall count (at least 3), level your bed nicely, decrease print speed, increase layer height (at least 0.2mm), increase print temperature, check your seam quality, calibrate your e-steps and fine tune your retraction settings to make sure no holes appear after a layer change.