Playseat Challenge Fanatec Shifter RH/LH mont

prusaprinters

<h3>Updates</h3> <p>23.01.2022 - update:</p> <p>-This has used me excellent while owning playseat but I have now moved to a P1X rig and don't plan to edit files for this.</p> <p>14.04.202 - update v1.1:</p> <p>-Shifter_ball_ram failed, probably hit with it while storing the whole seat, I have made stronger version of it and so far noo need to change anything. I suggest you go for a "shifter_ram_ball_harder.stl" file instead of a regular one.</p> <h3>About Thing</h3> <p>This is v.1, it requires modifying prints with soldering iron to fit, don't print if you don't have to.</p> <p>v.2 is already in the making, I'm publishing this just for people to test it so if you are impatient you can try v.1 or wait for a newer version.</p> <p>This idea is based on @<a href="/dabinn">dabinn</a> youtube video, but since RAM mounts are either too expensive or too long to wait for a shipment from China (coronavirus) I decided to fully print my RAM and GoPro mounts.</p> <p>Since I have no clue in 3d modeling this thing is based on their respected designers, I just modified them to suit my needs.</p> <ul> <li>YakFisher 1.5" Ball System with Garmin Ball Mount by <a href="/YakFisher">YakFisher</a></li> <li>Flashlight holder (mount) for bicycle bar / bicycle light by <a href="/AndrewUsov">AndrewUsov</a></li> </ul> <h3>Hardware</h3> <p>This is out of my head, I do have to reameasure everything.</p> <p>I'm assuming you have access to most of the M3, M4, M5 and M6 hardware.</p> <ul> <li>M6 x 30mm and nuts - 2pcz</li> <li>M5 x 40mm and nuts - 1pcz</li> <li>M5 x 35mm and nuts - 1pcz</li> <li>M4 - few bolts and nuts</li> <li>M3 - few bolts and nuts</li> </ul> <h3>Slicing</h3> <ul> <li>Every part is structural and I would print with it with at least 80% infill and min 5 walls.</li> <li>Only 22mm hinges require support, other can be printed without.</li> <li>Note the orientation for best rigidity when slicing, should be done automatically by slicer.</li> </ul> <h3>Post Printing</h3> <ul> <li>Part "left_mount.stl" requires modification to acquire a greater angle of Ram Mount. I used soldering iron on both ends.</li> <li>I have included tpu_5layer file that goes under both upper 25mm hinges. 5 layers were too thick for my chair so I lovered it in Cura to 2 layers and now it fitted perfectly snuggly.</li> <li>Tpu is used for better grip and for protection of a Playseat.</li> <li>Upper hinges are designed for an M6 bolt instead for M5 t-nut that comes originally with SQ shifter. Insert M6 nut in "m6_t_nut_bracket.stl" and slide it instead of M5 in the shifter.</li> </ul> <h3>Final words</h3> <p>I've been using this mount for a few days now and it's been really sturdy. I hope PLA can withstand it.</p> <p>Now Next Level Racing has announced F-GT LITE cockpit and I'm considering to order one, I'll just wait for a few reviews.</p> <h3>Print Settings</h3> <p><strong>Printer Brand:</strong></p> <p>Creality</p> <p class="detail-setting printer"><strong>Printer: </strong> <div><p>Ender 3</p></div> <p><strong>Rafts:</strong></p> <p>Doesn't Matter</p> <p class="detail-setting supports"><strong>Supports: </strong> <div><p>Doesn't Matter</p></div> <p><strong>Resolution:</strong></p> <p>0.2</p> <p class="detail-setting infill"><strong>Infill: </strong> <div><p>20-80 %</p></div> <p><strong>Filament:</strong> DEVIL DESIGN PLA &amp; TPU</p> </p></p></p> Category: R/C Vehicles