PNV-10T Bayonet Mount

prusaprinters

<p>I took inspiration on Orangespy's mount for a PNV-10T to a western Style bayonet mount.</p> <p>I remade the design to fit in the rail of my 2020 produced PNV-10T and to connect to my Rhino 2 via the 4 screws that come with its bayonet adapter.</p> <p>It simply slides into the rail and is secured with a M6 Bolt. You shouldn't need more than 5 mm exposed threads to tighten it down enough to hold it snugly. Im using a longer one with 2 nuts attached so that i can have a good grip on it. The screw should probably not be longer than 22 mm or it would interfere with the Rhino mount.</p> <p>I've made 2 Variants of this mount, one to mount to the front of the Sliding piece and one to mount on the back of it.</p> <p>You definetely need supports for the piece that slides into the rail of the PNV-10T.</p> <p>I would advise against printing it standing up, on the one hand, i think the threads wouldn't come out working and on the other hand i would be worried that it could break on the layer lines.</p> <h3>Print Settings</h3> <p><strong>Printer Brand:</strong></p> <p>Creality</p> <p class="detail-setting printer"><strong>Printer: </strong> <div><p>Ender 5</p></div> <p><strong>Rafts:</strong></p> <p>No</p> <p class="detail-setting supports"><strong>Supports: </strong> <div><p>Yes</p></div> <p><strong>Filament:</strong> Esun PLA+ Post-Printing =============</p> <p>After printing, you should probably sand the part that interfaces with the PNV-10T to make it slide more freely</p> </p></p> Category: Sport & Outdoors