Pokemon Go Aimer - universal - tested on Sony Xperia Z

thingiverse

UPDATE: After a lot of testing and redesigning I have found my finale version: http://www.thingiverse.com/thing:1702184 UPDATE: I have uploaded another version, where the thickness of your smart phone doesn´t matter that much anymore : http://www.thingiverse.com/thing:1696283 With this Aimer, the button problem with the galaxy S models is solved! UPDATE: Added a picture with the distances. This might help scaling the STL for your smart phone thickness UPDATE: Replaced the STL by a aligned version. Should now perfecly place on your build plate. UPDATE: The Hard Button for Samsung Galaxy models is an issue. You should add a hole on this Position. SOLVED: http://www.thingiverse.com/thing:1696283 This is a Remix of the Pokemon Go Aimer from Jcach. I have triied to make it universal for most Smart Phones with a Thickness of around 8 mm. The idea behind is, that the distance between clip end and front is a little lower than on the bottom. Print it and tell me in the comment section, if it fits for your mobile! For Sony Xperia Z it´s working. Print Settings Printer Brand: MakerBot Printer: MakerBot Replicator 2 Rafts: No Supports: Yes Resolution: 0.2 Infill: 30 Notes: Position like in the Pictures. How many support do you need highly depends on the bridging capabilities of your printer. 3 Shells/0.2mm/30% Infill. Print time: > 1h Slicer: S3D MAKE SAVE, THAT THE FRONT SURFACE LIES FLAT ON THE BED! (there are some 1degr angles included to make it work)