Power Strip Mount for Uplift Desk

prusaprinters

<p>Use this bracket to mount a power strip or other accessories to the underside of your Uplift desk. &nbsp;It can be mounted to the desk frame crossbar's threaded holes with M8 x 10mm cap screws.</p><p>The difference between the -1 and -2 models is the orientation of the slot position. &nbsp;Use one of each to mount a power strip or whatever else might come in handy. &nbsp;Whether it will work for your power strip or other accessory depends on the spacing of the mounting holes of your item. &nbsp;The mounting holes of the brackets are slotted to increase the chance that it will work with a given item.</p><p>I used #6 screws to mount a power strip to these brackets. &nbsp;A nut on the opposite side of the bracket helps secure the screw, and then the power strip is just mounted on the heads of the screws.</p><p>Suggested print orientation would be on edge with the mounting slot perpendicular to the print bed. &nbsp;This provides the best mechanical properties (strength).</p><p>material: PETG</p><p>infill: 15% (minimum)</p><p>supports: from build plate only</p>