Power Strips wall bracket or stand

prusaprinters

<p>Do you know “Flying” power strips because the cords are too short or clutter on the floor. With this easy to print wall bracket / stand bracket you have a better "home" for a power strip.</p><p>Fix it with two or four screws on the wall or place this new version with curved edges, on the stand and place a suitable power strip temporarly in it. I have tested it with different German types of power strips, with this model more power strips will fit. The bracket is fine for a power strip with a height of 42 mm and a width of up to 60 mm. There are so many different sizes of power stripes on the market, please test if it is fine for your model.<br>&nbsp;</p><p>Wenn using the bracket, make sure that the plug or power supply is still unobstructed in the power strip, when this is not possible, don´t use this model of wall bracket and design your own. When use a part for electrical devices please note your local code.</p><p>I have printed the bracket with PLA. The bracket needs support in some areas, the overhang there is to big. Please have a look at the attached picture (screenshot PRUSA slicer).</p><p>The stand do not need support material.</p><p>For the design I have used Fusion 360 and the Prusa slicer.</p><p>&nbsp;</p>