Print-in-place drawer and door safety lock

prusaprinters

<p>Print-in-place safety lock with an articulated hinge design, swivel base and a twist lock. Each end is fastened with either a screw or by double-sided adhesive tape. If you are using tape, I have included two “adhesive plates” which can be glued to each end/side for a larger contact surface. Note that there are two adhesive plates, one for the swivel base side and one for the twist lock side.</p><p>The part clearances are relatively loose and it should be easy to print without making the parts fuse together, but if this is a problem, check so that the first layer isn't too squashed and possibly lower extrusion multiplier and speeds a bit. The hinges and swivels will likely need to be worked in by rotating them a couple of times until they run smooth, a drop of machine oil will help as well.</p><p><i>NB! Don't use this part to secure potentially dangerous items from the hands of children. This is a 3D-printed part that will break and the twist lock function is not that difficult to for a child to figure out.&nbsp;</i></p>