Project Flip - 6 liter Mini-ITX SFF PC case

cults3d

A small form factor case for custom PC builds. This PC case is designed to be portable while still using hardware for a powerful gaming PC. It is inspired by the Dan A4 case and using a similar aesthetic with hairline brushed texture and rounded corners. These files are for personal use only- do not use them for commercial purposes without permission. THE PHOTOS SHOWN ARE FOR REFERENCE ONLY OF AN EARLY PROTOTYPE. Main differences between the prototype photos and model files are as follows: Motherboard side mounts are combined into one single tray piece Case is longer by 5mm in order to accommodate slightly longer cards Power switch opening near the front side of the GPU has been removed (the one beside the power supply is still present) This model contains three pieces- two for the outer shell and one motherboard tray. The shell pieces and brackets are connected via screws and slot joins. Insert hex standoffs in the hexagonal holes. The holes for the graphics card bracket will be need to be threaded first. Custom side panels can be optionally printed or laser cut to attach to the sides of the case. Parts compatibility: Mini-ITX motherboard CPU cooler max 48mm height Graphics card max 276mm length, 140mm height, 2 slot width Flex-ATX power supply, 185mm max length 1x 2.5 inch storage drive 25cm-30cm PCIe straight-angle riser cable (for graphics card) Anti-vandal momentary power switch 16mm Materials list: 3D printed parts for this case 10x 8mm M3 female hex standoffs for case shell attachment and motherboard tray 8x 6mm M3 screws for securing case shell standoffs 6x 5mm countersunk M3 screws for the motherboard tray standoffs 8x 5mm M3 female hex standoffs, 8x 6mm M3 screws for attaching side panels (optional) 25-30cm PCIe riser cable, straight 90 degree socket (for graphics card) 3x 6-32 thumbscrews for graphics card (bottom and top bracket screws)