Protective visor (face shield) for health proffesionals fighting Coronavirus

prusaprinters

<p>This is a remix of 3DVerkstan Protective Visor (<br/> <a href="https://3dverkstan.se/protective-visor/">https://3dverkstan.se/protective-visor/</a><br/> ). The original one requires eight holes to be laser cut on the transparent film. My version uses only four, and they can be made using a regular hole punch set at 5.5 cm.</p> <p>Requirements:</p> <ul> <li>A 8.5" x 11" transparent sheet (the ones used with old overhead projectors)</li> <li>A two-holes hole punch (picture included).</li> </ul> <h3>Print instructions</h3><p>No. perimeters: 50 (somthing high)<br/> Infill: 100%<br/> this will make sure everything is printed with perimeters, which will make the print faster and stronger.</p> <p>You can print two parts at the same part in a Prusa i3 printer if you are smart positioning them. A Prusa Slicer project file is included, as well as an STL with two parts arranged to fit in a Prusa i3 printer and other similarly sized printers.</p>