Prusa heated platform leveling thing

thingiverse

Less of a new thing and more of instructions for adding leveling to the HBP on a prusa using the AlephObjects Aluminum bed plate Instructions Parts list: 4 - http://www.thingiverse.com/thing:6599 M3 Rosettes 24 - M3 nuts 4 - M3x50 bolts (I think 30MM will work - but I have 50MM) 2 - Pen springs (cut these in thirds - only 4 pieces are needed) I applied it to:http://www.thingiverse.com/thing:10754 AlephObjects Aluminum bed plate 1) print the rosettes and insert M3 nuts 2) insert the M3 screw through from the nut side and put on a locking nut 3) Put a spring portion on the screw 4) Thread the screw into the aluminum plate from the bottom 5) Thread 2 M3 screws on top of the plate --- repeat 1-5 this for all 4 screws 6) put the heated bed over the 4 screws 7) put on 2 M3 nuts atop the heated bed 8) Adjust the height and lock the twin nuts as "jam nuts" around the heated bed (leave space between the nuts and plate so the screw freely rotates) Hopefully the balance is evident at this point. The TXT file is just these text. Thigiverse wont allow just a pic to represent a thing.