Prusa i3 mk2 Easy Spool Holder/Rollers - Low Rider Remix

thingiverse

Ismael Feliciano released a v2 version of his original Easy Spool Holder, now with rollers and a filament guide. Not being able to run his design in my enclosure due to height limitations I redesigned my low rider supports to suit the new rollers, incorporating the filament guide and adding some tabs to help keel the spools in place. I also made the rollers and bolts a bit longer to suit larger spools, up to 96mm. EXTRA PARTS NEEDED: 4x 608 bearings (any skate/surf shop should carry them, they are very common) EDIT (2017.02.21): Uploaded the Main Supports to a _V8 with an extra stiff filament guide and a bit taller to cope with full height prints. uploaded the Nuts and Bolts to a _V2 because there was some errors in the file, these are better. EDIT (2017.02.26): Uploaded the Main Supports to a _V9 with a cleaner design, minus the tabs that did lock up some spools, I'm running these in ABS for a while now and haven't encountered any issues so far, solid! Print Settings Printer: Prusa i3 mk2 Rafts: No Supports: Doesn't Matter Resolution: 0.2mm Infill: 15-20% Notes: I printed these prototype's using Prusa's Orange PLA but to ensure warping doesn't occur overtime (as enclosures run mildly hot inside), you should print using ABS. EDIT (2017.02.21): Already did a couple prints using ABS, I got some warping in the supports but overall worked ok after assembled. I recommend using the updated version files (supports V8 and Nut's n Bolts V2) for better results. EDIT (2017.02.26): Already did a couple prints using ABS, I got some warping in the supports but overall worked ok after assembled. I recommend using the updated version files (supports V9 and Nut's n Bolts V2) for better results.