Prusa i3 MK3 Camera Holder

prusaprinters

<p>With receiving the Prusa MK3 and already having the Prusa i3 MK2 Camera mount, I decided to make a slight adjustment so the mount would fit the Prusa MK3. Same design is kept, just modified it to fit the MK3.</p> <p>If adjustments need to be made, let me know.</p> <p>Update 09/12/18 - I've just added another mount for the MK3 with the R3 extruder. This mount is longer (so it can be used with the other printers of course) and I've made the fitting a bit more snug in an attempt to minimize wobble.</p> <p>Update 02/13/18 - I noticed that the bracket was just a tad too short and would cause the camera to run into the extruder assembly. I uploaded a second file that is slightly longer to fix this issue. I also made it a little bit more sung for attaching to the print bed.</p> <p>You can find the original files &amp; model I remixed from here: <a href="https://www.thingiverse.com/thing:2010233">https://www.thingiverse.com/thing:2010233</a></p> <p>See also the Standard GoPro Mount for the Sliding Bracket: <a href="https://www.thingiverse.com/thing:2817226">https://www.thingiverse.com/thing:2817226</a></p> <h3>Print instructions</h3><h3>Category: 3D Printer Accessories Print Settings</h3> <p><strong>Printer Brand:</strong> MK3</p> <p><strong>Printer:</strong> <a href="http://amzn.to/2DxjZlB">Prusa i3</a></p> <p><strong>Rafts:</strong> No</p> <p><strong>Supports:</strong> No</p> <p><strong>Resolution:</strong> 0.2mm</p> <p><strong>Infill:</strong> 20%</p>