Prusa i3 MK3 PSU cover with rear power input
prusaprinters
<p>This is a PSU cover for Prusa i3 MK3 (and MK3S) that has the power input on the back.</p> <p>I recommend that you completely remove the PSU from your printer (including all the wires!) before attempting to install this cover. I did it with all the wires still zip tied to the printer and it was such a pain.</p> <p>The power panic board still fits in this cover.</p> <p>This cover works with the standard rubber feet.</p> <p>You will only need 1x countersunk M3 bolt and 1x M3 square nut.</p> <p>Print the "wire gap" version if you would like to make installation a little bit easier.</p> <p>STEP file included for easier remixes.</p> <h3>Print instructions</h3><p>These models should work with a variety of print settings. I used:</p> <p>.20 layers<br/> no supports<br/> oriented as shown in the .stl's</p> <p>PETG or ABS for heat resistance.</p>
With this file you will be able to print Prusa i3 MK3 PSU cover with rear power input with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Prusa i3 MK3 PSU cover with rear power input.