Prusa i3 Spool Holder
Summary STL download for the Prusa i3 Side Mounted Spool Holder If anyone would like it to a specific size or a different diameter compatible with our filament spools add a comment and i will upload as soon as possible. Please visit our website at http://www.iprintin3d.co.uk This will fit the standard Filament spool (56mm / 57mm spool inner diameter) Quick and easy to change Filament Rolls UPDATED now includes 32mm and 57mm Spool inner diameter STL UPDATED 19/02/2014 Now compatable with the standard Prusa i3 and the Prusa i3 rework. Required 2 x 8mm Nuts 2 x 8mm Washers 2 x 5mm x 15mm bolts 2 x 5mm Nuts 1 x 608zz Bearing 1 x 8mm x 430mm Threaded rod Instructions Required 2 x 8mm Nuts 2 x 8mm Washers 2 x 5mm x 15mm bolts 2 x 5mm Nuts 1 x 608zz Bearing 1 x 8mm x 430mm Threaded rod Instructions slide the Spool Frame Mount over the prusa i3 frame about 110mm from the surface up to the bottom of the Spool Frame Mount (right or left side) use the 2 x 5mm bolts and 2 x 5mm nuts to secure it tightly. drop an 8mm Nut into the Nut hole on the top of the Spool Frame Mount. Screw the 430mm threaded rod into the Spool Frame Mount and nip it tight. slide the 2 x 8mm washers over the threaded rod and up to the end of the Spool Frame Mount. Slide on the Spool Holder up to the washers followed br the 608zz bearing and push into its holder. Push the final 8mm Nut into the Nut hole on the 608zz Capping and screw the 608zz Capping onto the threaded rod until it is tight and firm but free to rotate. Push on you Filament Spool.