Prusa i4 glass holder

thingiverse

This is a simple yet very effective holder for the Prusa i4 glass bed. There's a little tolerance that you can use to achieve a perfect fit. Just use sandpaper to smooth the surfaces until the sides fit perfectly. Use a round file or a 8mm bit to enlarge the hole. This type of design can be used with all kind of printers which have a similar bed design. Like and share! Print Settings Printer: Prusa i4 aka Arky 3D Printer Rafts: No Supports: No Resolution: 300 microns Notes: I used 100% infill but you can probably use lower percentage; Measurements are: 45mm x 15mm x 4mm N.B: height is 4mm for a 4mm thick glass. Scale to 3mm if you're using a 3mm thick glass.