Prusa Mini Base - Camera Arm support
prusaprinters
<p>After modding my Prusa Mini with the <i>Prusa Mini Base by David Warboss</i> I wanted a integrate my RPi camera mount. The RPi camera mount I used in the past was by <i>Seabird HH</i>. I liked it because it was simple to print, did not add any weight to the motors on the Mini and was adjustable. I also added the <i>Raspberry Pi Z-Box by The Freewheeler</i>, for OctoPi, so I knew I would not need the usb storage option on the front of my Mini. I relocated the USB storage to the right rear of the base for USB storage.</p><p>The insert was re-mixed in Fusion 360 and the camera support arm was also designed in Fusion 360.</p><p>Printing is pretty straight forward, I just printed everything base of what I had printed the Mini base on which was 0.15mm layer height with a 0.4mm nozzle. Using Prusa Slicer defualt 0.15mm quality it takes ~ 2.5 hours to print.</p><p>When it is all printed I secured the camera support arm to the insert with 1 M3 x 12mm socket cap screw. The hole may be a bit tight, but it fits together nicely. A RPi camera cable of 1m will work fine if you are using the Raspberry Pi Z-box. You will even be able to do a bit of cable management along the way using the other inserts in the Mini Base legs.</p><p>Prusa Mini Base - <a href="https://www.prusaprinters.org/prints/63483-prusa-mini-base">https://www.prusaprinters.org/prints/63483-prusa-mini-base</a></p><p>Raspberry Pi Z-box (3B/3B+) - <a href="https://www.prusaprinters.org/prints/68894-raspberry-pi-z-box-integrated-3b3b-case-for-prusa-">https://www.prusaprinters.org/prints/68894-raspberry-pi-z-box-integrated-3b3b-case-for-prusa-</a></p><p>Prusa Mini Raspberry Pi Camera Mount - <a href="https://www.prusaprinters.org/prints/31750-prusa-mini-raspberry-pi-camera-mount-by-clip-faste">https://www.prusaprinters.org/prints/31750-prusa-mini-raspberry-pi-camera-mount-by-clip-faste</a></p><h3><strong>Print instructions</strong></h3><p>Printer brand:<br>Prusa</p><p>Printer:<br>Prusa Mini+</p><p>Rafts:<br>Doesn't Matter</p><p>Supports:<br>No</p><p>Resolution:<br>0.15 - 0.20</p><p>Infill:<br>15 - 20%</p><p>Filament_brand:<br>Sandoz 3D</p><p>Filament_color:<br>Orange</p><p>Filament_material:<br>PLA+</p><p> </p><p> </p>
With this file you will be able to print Prusa Mini Base - Camera Arm support with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Prusa Mini Base - Camera Arm support.