Prusa Mini Cable Chains (x-axis, headbed)

thingiverse

**Update** I was correctly informed by a very observant individual on Prusaprinters.org that what I labeled as the z-axis is actually the wires for the x-axis. I have updated the title and instructions accordingly, however I'm lazy and don't want to re-upload all the files so pretend all the z-axis file names now read x-axis:) **Cable Chain Setup for Prusa Mini x-axis and the heatbed.** This has some other prints remixed in it. Prusa i3 MK3 Cable Chain Add-on (ALL AXIS) https://www.thingiverse.com/thing:2862375 X Stepper sleeve wire clamp https://www.prusaprinters.org/prints/3436-x-stepper-sleeve-wire-clamp The default heatbed cover from Prusa **Print Instructions** Additional Parts: 3 - Small Zipties 3 - m3*10 Bolts 3 - m3 nuts Print one each of parts 1-8 23 each - part 9 for the x axis 25 each - part 10 for the x axis 15 each - part 9 for the Heatbed 16 each - part 10 for the Heatbed PLA or PETG work great. 0.20 Layer height. 15% infill. No support needed. All parts are pre-oriented for printing. X-AXIS: Remove electronics covers on the MINI and reroute x-axis wires under the frame. Slight cutting away of the electronics case will probably be necessary for cleanest look. Place 2 nuts into part 1. Ziptie part 1 to the x-axis motor. Bolt part 3 to part 1 with the cable between them. Place part 2 against part 1, route cable and ziptie part 2 and cable to part 1. Place nut in t-nut, slide into bottom of x-axis frame, loosely bolt part 4 and route cable through. Add x-axis Chain and clip parts starting from the motor side. Tighten bolt on part 4. HEATBED: Replace bed cover with part 6. Unplug heatbed wires and reroute through y-axis wire hole. Add 15 chain and clip pieces starting from the headbed side. Place part 8 Adapter on heatbed cables and snap into part 7 Mount with the adapter open end Up. Some finagling may be necessary to get the cable length correct. Attach part 7 mount to frame with the y-axis motor cables between the mount and the frame. Reconnect heatbed and replace electronics cover.