Prusa Mini display box with Raspberry Pi Zero 2 mount

prusaprinters

<p>The Raspberry Pi Zero2 is such capable yet small machine that fits perfectly with Mini. So I modified the display box file and added this side mount for the pi zero. No support needed.</p><p>Ideally one should use the w version without the GPIO pin soldered. It should be also possible to change the orientation and moun the wh version, although not recommended.</p><p>At least two M2.5 screws are needed for mounting. I only have M2.5x8mm so I added in a case that I printed before for extra padding. It is the <a href="https://www.prusaprinters.org/prints/86855-raspberry-pi-zero-2-w-clipping-case-for-prusa/comments">Clipping case</a> from PierreNick in case you wonder.&nbsp;</p><p>Due to the geometry it is not easy to screw the two M2.5 close to screen. You can just omit them (as in the pic), and the mounting should still be really firm.</p><p>There is also the possibility to add the camera cable. I am still waiting for mine to arrive and will test it asap. Ideally this should be compatible with <a href="https://www.prusaprinters.org/prints/46427-prusa-mini-mini-raspberry-pi-camera-module-v21-8mp">This Camera Mount</a> by TinkrMakr.</p><p>=====Update====</p><p>2022.01.05</p><p>Camera mount compatibility confirmed (shown in pic). However, you need longer cables for connecting to the camera, otherwise disconnection will happen when Z position is too high. I have currently 15cm cable and it is not enough. I ordered 30cm cable from aliexpress and still waiting.</p><p>I am working on another version with its own camera mount. I am still not satisfied with the integration, will update when it is done.</p><p>2022.01.12</p><p>I have upload the camera <a href="https://www.prusaprinters.org/prints/114146-prusa-mini-display-box-with-raspberry-pi-zero-2-an">mounted version</a> too. I actually prefer this if you are interested in adding a RPI camera.</p>