Prusa Nozzle Cleaning Tool
prusaprinters
<p><strong>You have a cloged nozzle ? No problem with this tool.</strong></p><p>How to use:</p><p>Open the idler door and heat the nozzle to the matching filament temperatur</p><p>Remove all visible filament</p><p>Insert the tool from above all the way down in the nozzle and push gently.</p><p>After all filament has left the nozzle you are done, close the idler door and feed new filament. </p><p> </p><p>This tool consists of a pretty standard handle and a stainless steel rod, diameter 1,5mm, a little bit smaller than the standard filament. Cut the rod to 240mm, the length is important, its a long way down the nozzle tip.</p><p>Glue the rod into the handle</p><p> </p><p>For the stainless steel rod google for </p><p>Nirosta-Draht 1,5 mm /1000 mm federhart</p><p>or</p><p>100mx1.5mm DIY Toy</p><p> </p><h3> </h3><h3> </h3><p> </p>
With this file you will be able to print Prusa Nozzle Cleaning Tool with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Prusa Nozzle Cleaning Tool.