Prusatones Vinyl Player - Motor Visualizer

prusaprinters

<p>A retro record player with rotating vinyl as a motor rotation visualizer. This model consists of 4 parts, all of them can be printed without supports by orienting faces to the bed.&nbsp;</p><p>You will need a 8x5 mm magnet or two 8x3 mm magnets.&nbsp;</p><p>On my printer (Elegoo Neptune 2) it cannot be positioned on a nice visible spot sadly.</p><p>&nbsp;</p><p>→PRINT TIPS:</p><p>&gt;The vinyl can be printed in two colors with normal printers by adding a “pause at height” script. If you slice it with 0.12 layer height and 0.2 initial layer height you can pause it at layer 13 and swap your filament.</p><p>&gt;If you print with concentric Top/Bottom layers you will improve the look of the vinyl plate.</p><p>&gt;The recessed bottom hole is intentionally shallow and if you print with the previous tip it will mark where to place and glue the magnets.</p><p>&gt;Print with 3 perimeters as the walls of the record player are 1.2 mm thick.</p><p>&gt;Face orientation when printing:</p><p>→ Vinyl: As per .stl file.</p><p>→ RecordPlayer: Select the top face so that the thin walls point up.</p><p>→ Needle: Select top face to orient with the bed so the cylinder points up.</p><p>→ Horn: Widest part of horn face down on the bed.</p>