PS4 vertical stand logo and buttons_bottom

thingiverse

I modified http://www.thingiverse.com/thing:216948 to have a Playstation logo and the iconic buttons on the front. Do you live in the Netherlands and want it printed: http://www.protoshape.nl I chose to use a 15 mm profile to give it a bit more sturdiness, however mine currently stands without a stand and is pretty stable. The clearance from the blue-ray drive stays at least 6 mm when used "upside down" like I do. I will probably give it some more edits like one with the assassin's creed logo on the side or perhaps an other game if someone has an awesome idea. And I kind of feel the need to say that because this stand has the PS logo, please do NOT sell it. It's strictly for personal use and selling it would make you kind of an ass. Since I have uploaded several new designs it might be useful to give some instructions to find the right ones. To start you will need the rear stand but since there's only one finding it shouldn't be a problem. Besides the rear stand you'll also need a front stand. The files are named GAME_logo or GAME_logo_text, the one's with only a logo have a game logo on the left side and the one's with a logo and text have a game logo on the left side and the title on the right side. So have fun and if you happen to print one please post a picture as I'm really excited to see your results. Update 7 December 20:06 GMT+1: I added an BO3 design and one assassins creed design with the logo on the one side and text on the other. I'm currently printing the stand and it will be finished in an other 10,5 hours. Update 8 December 21:49 GMT +1: Yesterday evening I heard some rattling noises and it turned out that the nuts that used to mount the Y belt to the heated bed actually came off and ruined my print. So after a quick fix I restarted the print and decided to tweak some settings. I ended up using my usual settings with the printer speed on 100 and the feed rate on 40. And after 16 hours and 9 minutes it's finally done. So I'm actually quite satisfied with the print. It's not perfect but it's the first big print I ever made so I think it's good enough but go ahead and judge for yourselves. Print Settings Printer Brand: RepRap Printer: Prusa i3 Rafts: No Supports: Doesn't Matter Resolution: 0.1 Infill: 20% Notes: material: PLA temp: 210 C heat bed: 50 C printer speed: 40 How I Designed This How to make your own.. I used Inkscape to make vector images from the photo's I wanted to use and saved them as dxf images. After I had made those dxf images I imported them in Solidworks and edited the original files. If you want you could also use blender but I have no experience with that program since I already use Solidworks. There are lots of tutorials online that can guide you through. I haven't printed it yet but I guess it's pretty straight forward. I'll probably print it on Monday and when I do I'll post an update.