Pull Copter Finger Ring - Print in Place

prusaprinters

<p>This is a remix of <a href="https://www.prusaprinters.org/social/16057-agepbiz/">agepbiz</a>'s <a href="https://www.prusaprinters.org/prints/35410-pull-copter-finger-ring/">Pull Copter Finger Ring</a>.<br>No assembly required! (Although you do need to remove some support material.)</p><p>I merged the ring and frame parts together, removed the no-longer-necessary screw holes, and changed some overhangs to optimize printing for the new orientation.<br>Because I had to change some of the overhang orientations, the copter_key (pull cord) needs to be mirrored from the original.</p><p>&nbsp;</p><p>If you would like to use a longer pull cord, <a href="https://www.prusaprinters.org/prints/35796-longer-key-for-pull-copter-finger-ring">I recommend this one</a> by <a href="https://www.prusaprinters.org/social/1556-gered">Gered</a>. Just make sure you mirror it in the slicer before you print it. (In PrusaSlicer, right click the model, go to “Mirror”, then click “Along X axis”.)</p><h3>Print instructions</h3><p>copter_ring_print-in-place.stl needs to be printed with supports. The auto-generated 'on build plate only' supports work just fine.</p><p>The 3MF file has the copter_ring_print-in-place, an unmodified copter_rotor, and a mirrored copter_key. It also has settings for supports on the copter_ring only.<br>The gcode is sliced directly from the 3MF with the default Prusament PETG profile.</p>