pully v2

thingiverse

Here are the instructions you need to follow for your DIY Motor Mount: First, select the correct configuration of options. Then adjust each option to suit your requirements. Using these settings: * Set the m3_nut_hex value to 1. * Determine if idler is used by setting the value to either 0 or 1. * Choose the height of the idler with a numeric value, e.g. idler_ht = 4.7 * Adjust the number of flats on the m3_nut_hex with a decimal value, e.g., m3_nut_flats = 5.6. * Determine the depth of the m3_nut_hex by entering its exact measurement in mm. * Set nut_angle to either 30, 45, or 90 degrees to ensure it aligns perfectly with your components. Choose the design features as follows: * Increase or decrease the retainer height according to your specifications, e.g., retainer_ht = 2.8 * Adjust profile settings according to need: Select from either 1 or 2 profiles. * Decide on the size of teeth by entering its count and width values in decimal points. Next, make the final selections for hardware compatibility: * Select pulley sizes in millimeters - for instance, diameter and thickness * Set distance between m3_shaft_distance as required Last but not least, make a decision regarding which type of motor mount to install. Enter in how many total number of nut parts will be necessary (in addition to specifying dimensions as requested). When all values have been adjusted accordingly, press "Download" or 'Customize and print'. The object will then show what it would look like after having completed all the choices made. This allows for viewing prior to actually printing it out.