PVC holder 10-20mm tube
prusaprinters
<p>Simple wall bracket to hold a tube or line with a diameter of 10-20mm with a screw. The tube in the pictures is 16mm.</p> <p>Secure the bottom half with a screw. The top half should clip right onto the first half.</p> <p>Fusion 360 file added, feel free to remix.</p> <p><i>Let me know if you have any other suggestions and I see what I can do.</i></p> <p>Some people have asked me for a Paypal donation link: paypal.me/jahtimojah </i></p> <h3>Print instructions</h3><p>Print in the orientation show in the pictures without supports.</p> <p>Printed with a layer height of 0.32mm ensures the teeth snap together perfect (other heights have not been tested).</p> <p>One set of clips costs you about 3.5meter of filament which means you can print about 100 pairs of clips with a 1kg spool.</p> <p>In case your print does not snap together there is are two additional prints with +0.15(more loose) and -0.15mm(tighter) tolerances. These tolerances only change the dimensions of the top part.</p> <p>As for materials, PLA works just fine.</p>
With this file you will be able to print PVC holder 10-20mm tube with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on PVC holder 10-20mm tube.