QBO cup stand shelf

thingiverse

I bought a QBO Essential and did not get the color combination I preffered. So I reverse engineered the cup stand to print it in a different color. I ended up with a couple of these cup stands in different colors but I can only use one at a time so what to do with the rest of them? Well they look like little shelfs and since they are build to hold cups ... So we need a part to mount these shelfs to the wall. This mount is designed to be clued to a wall and allow easy attatch and detatch the "shelfs" By the way I contacted Tshibo before uploading this thing and asked for permission. To keep the Wall mounts close to invisible I printed them in white PETG. I choose a layerheight of 0.3 mm to save some time and an infill of 100% to avoid holes inside the print. Though the shells should already fill the parts. The print orientation is same as it is mounted to the wall. This way it needs no supports. The cup stands are also printed in PETG and different colors. I used 0.3 mm and the dynamic layerhight of the prusa slicer. This way there should be no need for supports none the less I used painted on supports that I kept as small as possible again to safe time and of course material. But I used supports to get as clean a part as possible. The infill is 30% with two shells. PETG is my favorite material but you can of course use PLA as well. The surface of the original stand cup stand has a rubber finish which makes it much less slibbery and it is heavier. The handling is different but the new stands look gorgeous and you can print them in your favorit colors.