QIDI X-MAX Titan Aero 2.85mm

thingiverse

Super BIG Shout out and Thanks to CWILLS75 for the Qidi X-Plus & X-Max Carriage BMG Extruder & Dragon or V6 Hot-End Mod!!!!! With that I was able to do this simple remix setup to run the Titan Aero extruder/hotend which I originally wanted to go with the E3D Hemara but E3D was and has been sold out of the 2.85mm setup for a while now..... so I went with the E3D Titan Aero in a 2.85mm with the volcanoe hotend and hardened steel nozzleX setup; as you can see there is no cooling system for the print bed because my setup is for PC and PA therefore I don't need a cooling system. this setup is running with the stock QIDI 1.8 Degree stepper, I originally purchased a more powerful .9 degree stepper but it was to long to clear on the backside however the stock one has been functioning exceptionally well...even with feeding the extremely thick 2.85mm filament. This setup would work just fine for 1.75mm and I have included firmware updates for both filament sizes again thanks to CWILLS75 for helping me with that. If you have any question I will do my best to help.