Quick Change Mount CoreXY Linear Rail

thingiverse

Quick change CoreXY Linear Rail mount with ADXL345 mount and an adjustable BLTouch Bracket. Also a Quick Change adaptor for the BIGTREETECH/ZS YONG 3 in 1 out Hotend. Uses 5015 blower fan for part cooling. Theres 4 different versions. -QckChange_Support_LinRail_CoreXY_ADXL_BLT.stl has the lever support tower that needs to be manually removed after printing, BLTouch mount, ADXL mount and the endstop riser -QuickChange_LinRail_CoreXY_ADXL_BLT.stl has everything but the support pillar. it needs to be manually added -QuickChange_LinRail_CoreXY.stl is just the mount with x endstop pillar. Endstop can be mounted on back left. needs manual support pillar in center -QuickChange_LinRail_CoreXY_Left_Endstop.stl endstop on left. Manually add support pillar Right_rail_upper_XYStop+Cable.stl is an edit of the original that has mounts for the X and Y Endstop. The X endstop needs the plastic housing that the stock Y endstop used and the y needs Y_Endstop_Plate.stl screwed into brynambas right_rear_upper to trigger. I also added a wire clamp to reroute the wiring to the right side of the printer. it perfectly fits the plastic black outer sleeve on the wire harness. I suggest you add a small zip tie to hold it in place. *Print topside on buildplate with either no supports or supports touching buildplate though that shouldn't be necessary Made a Quick Change for the H2 Extruder-UNTESTED Built to work with the AMAZING Ender 5 Plus CoreXY Linear Rail Conversion: https://www.thingiverse.com/thing:5194386 Built by: https://www.thingiverse.com/brynamba/designs Files used to build the hotend mount and associated parts: 3 in 1 out Hotend mount: https://www.thingiverse.com/thing:4324093 ADXL345 bracket for Ender gantry: https://www.thingiverse.com/thing:4882714 NF TC-01/TC-02/THC-01 Mount for CR10/Ender 3: https://www.thingiverse.com/thing:3148591 BIQU H2 extruder mount for an MGN12H linear rail: https://www.thingiverse.com/thing:5296389 Ender 5 Plus Corexy Conversion: https://www.thingiverse.com/thing:5194386 Quick tool change for Creality CR-10 / Ender series: https://www.thingiverse.com/thing:3369444 Notes: -Some files are ONLY NEEDED for a Quick Change mount for the BIGTREETECH/ZS YONG 3 in 1 out Hotend. Those ARE NOT NEEDED unless you have a 3in1out hotend. 3in1out files: 3in1out_QuickChange_Mount.stl fan-mount-upper.stl fan-mount-no-di.stl -The link above for the Quick Tool Change for Creality CR-10 / Ender series has a ton of remixes to work with most setups. -Blank_tool_holder.step can be used to create your own Quick Change adaptor