Quiet BerdAir motor mount

thingiverse

I needed a mount for my BerdAir type motor for my delta printer so designed this. To ensure as much noise dampening as possible, it uses three types of parts: - a pair of brackets printed from PLA (0.2mm, 50% infill) - shown in blue and green - a set of parts printed from soft material - I used Recreus Filaflex (0.3mm 20% infill) - shown in brown - an endcap for the motor printed from semi-flexible material - I used Real Filament Real Flex - shown in black The motor I use is https://www.aliexpress.com/item/24V-DC-Diaphragm-555-Vacuum-Pump-Air-pump-High-Pressure-Micro-Vacuum-Pump/32821282878.html To aid motor cooling, the rings that hold the motor have plentiful cutouts for ventilation. Cable ties can be used to secure the motor if required. These are also shown as a complete STL file to show orientation in the Thingiview (not for printing). 2x M4 bolts and washers are used to mount the unit to the printer frame and 2x M3 cap screws are used to assemble the two solid parts. The orientation of the parts is weird, just lay them flat on your print surface and they should print fine. Other parts designed for my printers include: - http://www.thingiverse.com/thing:1959901 (GT2 belt clamp (Prusa Y-axis) - http://www.thingiverse.com/thing:1937232 (Arduino Mega and RAMPS v1.4 case) - http://www.thingiverse.com/thing:1905409 (Prusa i3 steel 10mm upgrade) - http://www.thingiverse.com/thing:1959974 (Prusa i3 Steel Y-axis motor mount) - http://www.thingiverse.com/thing:1991116 (Prusa i3 Steel X-carriage) - http://www.thingiverse.com/thing:1991117 (E3D Chimera / Cyclops mount) - http://www.thingiverse.com/thing:1994413 (dual E3D Thermocouple amplifier board - housing) - http://www.thingiverse.com/thing:1090661 (Belt driven Bowden extruder with 1:2.5 reduction) - http://www.thingiverse.com/thing:896676 (enclosure for SevenSwitch FET) - http://www.thingiverse.com/thing:922455 (8mm Z-axis leadscrew bearing holder) - http://www.thingiverse.com/thing:922309 (Z-axis NEMA 17 adjustable endstop bracket) - http://www.thingiverse.com/thing:899607 (cable chain) - https://www.thingiverse.com/thing:2334269 (LCD housing) - https://www.thingiverse.com/thing:2377049 (PSU cover) - https://www.thingiverse.com/thing:2395715 (Chimera & Zesty Nimble drive cable spacer) - https://www.thingiverse.com/thing:2407651 (Chimera Zesty Nimble X-axis set for i3 clone) - https://www.thingiverse.com/thing:2436869 (A dummy NEMA 17 motor to hold the 5mm shaft) - https://www.thingiverse.com/thing:2748978 (A Duet WiFi housing) - https://www.thingiverse.com/thing:2749324 (A layer fan for the Smart Effector) - https://www.thingiverse.com/thing:2814068 (A Sannce I21AG mount for 3D printers) - https://www.thingiverse.com/thing:2844881 (A cooling duct for a Noctua 40mm fan on a Duet Smart Effector) - https://www.thingiverse.com/thing:2846955 (A quiet BerdAir type pump mount) - https://www.thingiverse.com/thing:3333609 (A Raspberry Pi case with 40mm fan) For avoidance of doubt, this item is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License. See http://creativecommons.org/licenses/by-nc-sa/4.0/ for more details.