QX13 Butt-Can Stem

thingiverse

QX13 BUTT-CAN ADAPTOR STEM Please see http://www.thingiverse.com/thing:2220336 for an example of a TOP to this project! Also, a close approximation of the can is provided in that file for educational modeling purposes. This is a stem/post for an “Eagle Butt-Can” Model 1200 and 1206. The old one was damaged. The parts list: QX13 Can Cover: (Adaptor Plate!) Insert two 6mm Hex Head bolts about 40mm long from the bottom, affix to Eagle Butt-Can (Model 1200 and 1206 work, for sure!) using two 5mm self-taping sheet-metal screws, or similar. Be sure to print 2 walls (3 total)! QX13 Mound: After the remaining pieces are assembled and ready to mount, this is placed on top of the 6mm bolts protruding from mounted Can-Cover, and affixed with 6mm Wing Nuts. It has the first section of the stem built right in! Be sure to print 2 walls (3 total)! QX13 Stem a: Print TWO of these for the next two sections. I didn’t require any glue, they fit so good! Place on a flat surface, line up your pieces, and thrust in-place squarely! Be sure to print 2 walls (3 total)! QX13 Stem a Top: Print One of these. It’s the final stem piece, the top of which is slightly modified for the geometry of the Topper. Be sure to print 2 walls (3 total)! I created the Bodies in FUSION 360. STEP files are included so that you can modify them in a cad program. Have fun! This was sliced and coded using ReplicatorG employing 2 shells (3 total) using PLA. FlashForge Creator Pro (Similar to Makerbot Replicator 2) Heated Bed 45 Celsius Blue Painters Tape on bed, no further treatment Print Temperature 220 degrees Celsius Supports for QX13 MOUND, others; No Supports, NO rafts. Feedrate 40 mm/s Travel Feedrate 55 (If anybody has more optimum feedrates, please share!) REQUEST: Please help me improve my sharing! STEP files have proven reliable for me to transport file between different CAD platforms. If STEPs are a problem for you, please let me know what other common and relatively generic Cad format works better for you.