Rack It shelving door hinge (Print enclosure)
thingiverse
I designed these hinges to accompany a 3mm acrylic door that will house my 3d printers in a modular racking system called "rack it". I have room for 2x Prusa i3's side by side in a 900mm wide shelf made from racking available at Bunnings Warehouse... These printed parts bolt to acrylic door and to racket upright and use a 6mm bolt as the pin for the hinge. -Fixing hinge to upright rack uses two M4x16mm bolts with body washer and nut per hinge -Fixing hinge to door uses two M5x16mm bolts with washer and nut per hinge -The hinge pin needs to be a M6 by 60mm bolt or can be 55mm Printed in PETG at 0.2mm layer height and 30% infill. The files are only for left hinge but I duplicate and then mirror in the slicer. I designed these magnetic door catches to fit a generic 12x2mm magnet. The top catch is simply friction fit onto rack it beam. The bottom catch in screwed into the mdf shelf. I have used a 3mm acrylic ontop of mdf shelf so if you were to use this model keep that in mind... Find more on this part and more at Nash Creative on instagram @nashcreative_au https://www.instagram.com/nashcreative_au/
With this file you will be able to print Rack It shelving door hinge (Print enclosure) with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Rack It shelving door hinge (Print enclosure).